Speedtech Accessories
Speedtech Wind Meter Accessories
Our Price:
$24.95
|
The Speedtech Instruments AP-28 Replacement Impeller is for use in Speedtech SkyMate and Skymaster wind meters. On the back of the unit (with the case open) near the impeller is a screw. Back this screw out about one turn (not all the way out), turn the impeller clockwise slightly and pull out. Replacement is the opposite. This replacement impeller is necessary only when the original impeller is damaged or worn. |
Our Price:
$34.95
|
The Speedtech Instruments AP-30 Replacement Impeller is for use in the Speedtech WM-350 wind meter. This replacement impeller is necessary only when the original impeller is damaged or worn. |
Our Price:
$24.95
|
The Speedtech Instruments AP-22 Carry Case case has an adjustable velcro strap which secures this sturdy nylon case to a belt, boat rail, backpack, almost anywhere. Fits all Speedtech handheld wind meters (SkyMate, Skymaster, and WindMate). Includes velcro closure to ensure your wind meter stays inside the case for protection and easy removal. Wind meter is not included. |
Our Price:
$24.95
|
Maximize your wind meter accuracy by using the Speedtech Instruments SM-WT Wind Tunnel. Can be used with all Spectrum and Kestrel handheld wind meters. Meets NCAA Track and Field requirements. The Speedtech SM-WT Wind Tunnel provides precise wind velocity in a specific direction for precision shooting and other uses. The wind tunnel slides easily over the top of the wind meter (no tools required), pressing until the center of the tunnel is snug with the top of the wind meter. Looking through the tube, the impeller should be visible. If used with a Kestrel wind meter it will not fit as snugly. |
Additional Accessories That Can Be Used |
|
Our Price:
$18.95
|
This compass has 2° graduation lines as well as large numerals at every 20° mark, and its clear base plate makes it easy to read a map and set bearings. To get a precise wind direction, simply point the large base plate arrow into the wind, turn the bezel to match the red North indicator to the red needle, and read the wind direction at the base plate arrow. This full-featured compass has a declination correction scale to allow you to make quick adjustments of map bearings to field headings, a sure-grip dial and ergonomically-contoured base plate, and includes inch and millimeter rules for mapping and plotting. |
Our Price:
$39.95
|
This case from Nielsen-Kellerman (Kestrel) is designed for military personnel wishing to carry their wind meter on a MOLLE/PALS mounting system. It features a padded 1000 Denier DuPont Cordura® Plus fabric body, a reinforced top flap, a 1" fastex buckle closure, and an inner pouch for spare AAA batteries. The unique MOLLE/PALS compatible mounting system has a secure fold/lock design with no hardware to break or rust. This mounting system also adapts for use on a belt up to 2 1/2" wide. |
Our Price:
$25.95
|
Use this sturdy but lightweight mini tripod from Nielsen-Kellerman (Kestrel) to take readings in the field. The tripod's legs extend to permit a maximum height of 10 inches, and a minimum of 6 inches. Ultra-compact and portable, it folds to just 7.5 inches and weighs 4.8 ounces. Secure your Speedtech wind meter using the tripod's standard mount fitting. Comes with a padded carry pouch. |
Our Price:
$89.95
|
This collapsible tripod from Nielsen-Kellerman (Kestrel) will accommodate any Speedtech wind meter using the tripod's standard mount fitting. The five section twist and pull assembly extends to 51" and collapses to a mere 14". Weighing only 1.7 pounds, this tripod is the perfect companion on any trip! |

-- The Staff at WeatherShack.com























